Difference between revisions of "Development:gfxreconstruct"

From FEX-Emu Wiki
Jump to navigation Jump to search
(Created page with "= gfxreconstruct = gfxreconstruct is a Vulkan layer that is useful for capturing a frame in a robust way. This is usually useful for capturing frames that is more portable th...")
 
m (Add development category)
Line 1: Line 1:
 +
[[Category:Development]]
 +
 
= gfxreconstruct =
 
= gfxreconstruct =
 
gfxreconstruct is a Vulkan layer that is useful for capturing a frame in a robust way.
 
gfxreconstruct is a Vulkan layer that is useful for capturing a frame in a robust way.

Revision as of 13:38, 22 June 2022


gfxreconstruct

gfxreconstruct is a Vulkan layer that is useful for capturing a frame in a robust way.

This is usually useful for capturing frames that is more portable than renderdoc.

https://github.com/LunarG/gfxreconstruct

Setting up gfxreconstruct

First thing you must do is build gfxreconstruct from source. Either for your host or guest rootfs, depending on if you're using thunks or not.

If building for the x86 rootfs then make sure to install it in to the rootfs after building. This can be done by just copying the install files over afterwards.

Set up environment variables

  • VK_INSTANCE_LAYERS=VK_LAYER_LUNARG_gfxreconstruct
  • GFXRECON_CAPTURE_TRIGGER=F12
  • GFXRECON_CAPTURE_FILE=/tmp/gfxrecon_capture.gfxr

Once you have the environment variables set up you can then launch a vulkan game. There will be some additional output in the terminal to know when the layer is capturing. You can then press F12 in the application and you'll get a capture in tmp after a few seconds. Be careful as gfxreconstruct will overwrite the capture on each press, so you will want to move each capture file.

Replay

gfxrecon-replay can be used to replay the capture which is quite useful.